Fill with water
1. Close the drain cock. (See emptying)
2. Attention with the option „electrical drain cock“
the drain cock is always closed as soon as the
device is de-energized. To operate the electrical
drain valve, read chapter 7.4 Electrical ball valve
(drain).
3.
Press the „Water filling“
button. Machine fills according to programm-
ing. Programming. Attention, do not exceed the
maximum mark!
Programming the filling quantity
• • The machine must be switched off to program
the filling.
•
Press and hold the „Water
filling“ button for 10 seconds.
• The filling switches on. Water runs in.
• „Learn to fill“ appears on the display. Now you
have to wait until the pool is filled between the
min. and max. Level.
•
By pressing the «water filing”
button again, the amount is set or the filling time
is saved.
Switch on the pasta cooker
•
Press the key . With pasta
cookers, the contactor switches on audibly and
the display shows 170 ° C and flashes every
second.
Wash-off
The wash-off function continuously adds fresh water
to reduce the starch and replace the water lost
through the boiling process and evaporation.
Press the „wash away“ button.
On / Off rhythm wash-off runs on the factory setting
level „medium“ Switching off the wash-off function:
Press the flush button again
Program the wash-off
1.
Press the „wash-off“ button for 10 seconds.
2. Change intensity with +/- key
3. Levels: very weak; weak; medium; strong; very
strong
4. To save, press the flushing button
Programming the parameters
Program the time (I, II, III und IV)
1. Press program buttons I / II / III for at least 10
seconds each.
(Double basket button)
2. The time to be set appears on the display.
3. Set the time with the „plus“ and „minus“ buttons.
4. Press program buttons I / II / III again each time
5. The respective program is now programmed over
time and can be used.
Temperature settings
•
53, 21, 33, 170,
TPM: 11% t: 21 C
3 Sek
The target value of the
temperature can be increased with the „+“ key and
decreased with the „-“ key.
• As long as the value is flashing, the specified
temperature has not been reached.
Query current temperature
•
Simultaneously press the „plus“ and „minus“
buttons
• The current measured temperature is displayed.
The measurement is done with a PT-1000 and has
an accuracy of +/- one degree Celsius.
www.gastrofrit.ch
© Switzerland Gastrofrit AG
10
