Gastrodomus GA200PR, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 29

5
- 5 -
TRANSLATION FROM THE ORIGINAL
Troubleshooting
If your appliance develops a fault, please check the following table before calling the service dept. of
your authorized distributor:
Fault Possible cause Action
The appliance is not
working
The unit is not
switched on Check if the unit has been correctly plugged in
and switched on
Plug or wire are
damaged Call the distributor or a qualified service
technician
A fuse in the socket
has blown
Check and in case replace the fuse
No power Check the power supply
Internal wiring fault
Call the distributor or a qualified service
technician
The appliance turns
on, but the
temperature is too
high.
Condenser blocked
with dust
Clean the condenser
The door is not
properly shut Check that the door closes and the seal is not
damaged
The appliance is
located near a heat
source or the airflow
to the condenser is
being blocked
Move the appliance to a more suitable location
Ambient temperature
is too high
Increase the room’s ventilation or move the
appliance to a cooler location
Insufficient airflow to
the fans
Remove any object that blocks the correct air
circulation
Appliance is
overloaded Reduce the products amount stored in the
appliance
The factory default
parameters have been
changed
Call the distributor or a qualified service
technician
The appliance is
unusually loud
The appliance is
touching a
neighbouring object
Check the installation position and move the
appliance if necessary
The appliance has not
been installed in a
level or stable position
Check the installation position and make sure
the appliance is into a stable position and in
level.
Disposal
At the end of the life of the equipment, you must dispose of it, according to the current local and
national rules.
The device contains electrical and electronic components called "Waste Electrical and Electronic
Equipment" (WEEE).