26
27
9. Place one cup/two cups on the drip plate and press the single cup/double
cup button (Single cup: approx. 30 ml / Double cup: approx. 60 ml) to start the
operation. The single cup or double cup indicator flashes.
10. The appliance returns to the standby mode automatically after the coffee has
run through.
HOT WATER FUNCTION
1. Follow steps 1- 4 in chapter “Preparing coffee“.
2. Place a cup under the coffee/hot water outlet. Make sure it can hold up to
280 ml of water.
3. Turn the control knob to position . The coffee/ hot water outlet dispenses hot
water (max. 280 ml). The steam/hot water indicator flashes and the program
indicator goes out.
4. Turn the control knob to position • after all the water has run through. You can
also turn it to this position to stop the flow of water. The appliance returns to
standby mode.
STEAM FUNCTION
1. Follow steps 1-4 in chapter “Preparing coffee“.
2. Turn the control knob to position to start the steam function. The steam wand
releases steam, the steam/hot water indicator flashes and the program indica-
tor goes out.
3. For a good milk frothing result, release the steam for 3-5 seconds, turn the con-
trol knob to position •, insert the steam wand into the milk and turn the control
knob back to position to froth the milk.
4. Turn the control knob to position • to stop the steam. The appliance returns to
standby mode.
BEFORE FIRST USE
Carry out the steps “Preparing coffee” and “Boiling water” ( Operation) with fresh
water up to the MAX marking and without coffee powder. Once all the water has run
through, discard it. Afterwards, clean the appliance and its accessories ( After use).
NOTE
There may be some noise when the appliance pumps water for the first time. This
is normal.
OPERATION
PREPARING COFFEE
1. Fill water into the water tank.
2. Make sure the control knob is in position •.
3. Connect the appliance to the power supply and press the power button. The
appliance starts preheating. The power indicator flashes and the grinding indi-
cators light up.
4. When the appliance is preheated, it enters standby mode. All button indicators
light up.
5. According to your desired amount of cups, insert the single cup or double cup
filter into the portafilter.
6. Fill an appropriate amount of coffee powder into the filter (Single cup: approx.
13 g / Double cup: approx. 19 g).
OR
Connect the grinding wheel to the
appliance’s grinding mechanism by turning it clockwise. Place the bean hopper
on top of it. Align the pins on the hopper and the appliance, press the hopper
down and turn it clockwise to lock it. The grinding indicators stop flashing. Fill
coffee beans into the bean hopper and set the hopper to the desired coarse-
ness between 0 (fine) and 30 (coarse). Insert the portafilter into the bracket on
the left. Press the desired grinding button (Single cup: approx. 13 g / Double
cup: approx. 19 g). The respective grinding indicator flashes and the appliance
grinds the respective coffee powder amount. If you want to grind less coffee
powder, press the previously selected grinding button to stop the grinding pro-
cess manually. Pull out the portafilter after grinding.
7. Press the coffee powder in the filter down with the included tamper. When the
edge of the tamper aligns with the edge of the portafilter, the coffee powder
amount is appropriate.
8. Insert the portafilter into the bracket on the right and turn it counterclockwise to
lock it.
