![Gastroback Colour Vision Pro Скачать руководство пользователя страница 35](http://html1.mh-extra.com/html/gastroback/colour-vision-pro/colour-vision-pro_operating-instructions-manual_3740425035.webp)
35
POWER CORD
A short power cord is provided to reduce the risks of becoming entangled in or tripping
over a long power cord accidentally. For adapting the length of the power cord to your
requirements, you may wrap max. 1 turn of the power cord around the cord storage
at the bottom of the base. Then fix the power cord in the notch at the rim of the base.
WARNING:
For operation, ensure that NO MORE THAN 1 TURN of the power cord
is inserted in the cord storage to avoid hazard due to overheating, fire, and electric
shock.
SELF-RESETTING OVERHEAT PROTECTION
The water kettle is fitted with a self-resetting overheat protection device, which safegu-
ards against overheating of the heating elements. Overheating may be caused by …
• too much scale on the heating elements. De-scale the kettle in time (see: ‘Care and
Cleaning’).
• too little water in the kettle. Always observe the MIN filling level (0.5 litre). Keep in
mind, that water will vaporize, when left for a long time in the kettle on high tempe-
rature.
• if overheating occurs, the kettle will automatically switch off the heating elements. In
this case, remove the kettle from the base and pour out the water. Then leave the
kettle cool down by waiting approx. 15 minutes. Thereafter, you can reactivate the
appliance.
CHECKING THE KETTLE FOR LEAKAGE
The water kettle is manufactured using high-grade materials for ensuring high working
life. Nevertheless, by mechanical shock or using inadequate solutions for de-scaling, the
seals of the kettle could get damaged. For this, you should check the kettle for leakage
regularly. This holds especially, if water accumulates under the appliance or the exterior
of the kettle gets wet during operation.
Thoroughly dry the exterior of the kettle and fill in 1.5 litre clear tap water (up to the MAX
filling level). When doing so, ensure that no water is spilled on the exterior of the kettle.
Place the kettle on a clean, dry, and level tray and leave the kettle stand for several
hours (over night).
Carefully examine the kettle and the tray. If water is accumulating around the kettle or
drops are on the exterior of the kettle, the kettle is leaking and may not be used again.