EN
37
DISPLAY
The air quality indicator is illuminated whenever the appliance is switched on:
GREEN
(best air quality)
BLUE
(medium air quality) or
RED
(bad air quality).
Surrounding the digits of the display area, one of various icons is shown for indica-
ting the type of displayed value: fan SPEED, PM2.5 value, activation of the TIMER
(only when sleep mode is on), filter replacement (filter icon), or selected hours of
operation until automatic shut-off (“H”; only with the timer activated). As a default,
the PM2.5 value is displayed.
IMPORTANT -
When the filter icon on the right upper edge of the display is illu-
minated, the filter units have been used for 2000 hours and need to be replaced
(see: ‘Care and Cleaning’).
When a function is activated, the corresponding indicator of the function button is
illuminated on the controller.
NOTE
In sleep mode, only the indicator of the sleep button is illuminated and with the
timer activated, “TIMER” is shown. All other indicators are dark.
BEFORE FIRST USE
WARNING
–
DO NOT let children play with the appliance, or any part
of it, or the packaging!
Always unplug from the power outlet, before cleaning,
moving, or assembling/disassembling any parts of the appliance.
1. Carefully unpack the appliance and all accessories. Check that all parts are in
proper working order (see: ‘Knowing Your New Air Purifier AG+ AirProtect’).
2. Pull out the front panel for getting access to the filter chamber. Take the filter units
out of the packaging. Doing so, hold the filter units only by their frame.
NOTE
There are 2 flaps at the frame of the nanocrystalline filter and silver ion filter. With
the filter unit installed correctly, these flaps are on the upper side facing to you.
Ensure that the dark foam at the rim is not damaged: no dents and tears. Other-
wise the purification function of the appliance may be corrupted. For operation,
the pre-filter has to cover the silver ion filter completely.