Selecting the Auto-Brew Start Time
Note:
For adjusting the start time the clock must be set. (See: Setting the Clock)
1. Press the
PROGRAM
button. The letter “
P
” will blink on the lower left of the display.
2. Adjust the time you want to start the brewing cycle by using the
HOUR
and
MIN
buttons
following the procedure for setting the clock.
Note:
Make sure the
AM
(in the morning) or
PM
(in the afternoon) indicator is properly set.
If the wrong symbol is displayed, press the
HOUR
button to let the little hand move around
the clock for additional 12 hours.
3. After ca. 20 seconds without any key pressed, the coffeemaker will automatically switch
back to normal operation, the blinking program icon “
P
” will be deleted from the display and
the clock will return to the current time.
4. To check or change the auto brew start time, simply press the
PROGRAM
button and the
pre-set start time will be shown on the LCD display and “
P
” blinks again. You can change the
adjusted start time as you like. With no buttons pressed, the display will automatically return to
the current time after ca. 20 seconds.
Starting Automatic Operation
WARNING: Special care is necessary, when leaving any electrical appliance
unattended while connected to the power supply and during operation.
Always ensure that the coffeemaker is prepared correctly and completely for
a brewing cycle, according to the instructions in section Preparing Some Cups
of Coffee, before starting automatic operation, and leaving the coffeemaker
unattended,
while connected to the power supply and during operation.
Especially ensure that the filter basket and glass carafe are inserted correctly and the cover of
the coffeemaker is closed properly.
Note:
Automatic operation is possible only, when clock and start time are adjusted. The tem-
perature setting of the warming plate used during brewing will be the same as what was set
during programming.
1. Ensure that you prepared the coffeemaker correctly and completely for the brewing cycle.
(See: Preparing Some Cups of Coffee)
WARNING: Ensure that the filter basket and glass carafe are inserted proper-
ly. The covers of coffeemaker and glass carafe must be closed fully. The glass
carafe must open the Pause & Serve mechanism.
2. Adjust the clock and select the desired start time. (See: „Adjusting the Clock“ and
„Selecting the Auto Brew Start Time“)
3. Press the
AUTO ON
button. A green light will appear indicating that automatic operation
is
ON
. The prepared brewing cycle will be started on the preselected time without any further
manual action.
34
