23
to avoid risk of fire, overheating, or electric shock. Do not block the ventilation slits
of the housing. During operation, the temperature control dial must be accessible all
the time (see: “Knowing Your »Design Warming Tray«”).
1. Place the appliance on a suitable surface near a suitable wall power outlet (see:
“Technical Specifications”). Turn the temperature control dial counter-clockwise
to the stop (“0”).
IMPORTANT:
In contrast to ranges and other heating devices, the desired digit on
the temperature control dial must face to the black point left-handed to the tempera-
ture control dial.
2. Unwind the power cord completely and connect the appliance to the power sup-
ply.
3. Select the desired temperature setting by turning the temperature control dial
clockwise. The red heating indicator will illuminate, showing that the appliance
is heating. However, there could be a time delay of some minutes until the hea-
ting plate will heat up perceptible. This is normal.
WARNING—High Temperature, Risk of Burns:
Even the housing
and handles of the appliance will get hot during operation. Only touch
the appliance at the temperature control dial during operation to avoid
scalds.
4. Wait until the red heating indicator goes out, indicating that the heating plate
reached the set temperature. The heating indicator will go on and out several
times during operation. This is normal.
CAUTION:
The appliance is not intended for heating up cold food. Only place pre-
heated cooking pots/pans or warm containers onto the heating plate, when the hea-
ting plate is hot. DO NOT place any frozen food onto the hot heating plate. Always
wait until the heating plate has reached the set temperature (heating indicator goes
out), before placing any hot containers onto the heating plate. Otherwise the hea-
ting plate could crack.
5. Place your warm pots, pans or heat-resistant containers onto the heating plate
to keep your food warm. Do not leave the appliance unattended while it is con-
nected to the power supply.
6. After usage, switch OFF (turn the temperature control dial counter-clockwise to
the stop) and unplug the appliance.
7. Leave the appliance cool down completely (approx. 1/2 hour). Then clean the
appliance (see: “Care and Cleaning”).
Содержание 42490
Страница 13: ...27...
