
38
Ensure to place the appliance on a level, flat, stable, and dry surface. For operation,
do not place the appliance near the edge of the working space or on inclined sur-
faces. Do not operate the appliance in a tray or tub or on a metal surface to avoid
high risk of electric shock, when overflow or splashing of hot water occurs. To avoid
overheating, before operation, always fill a sufficient amount of clear drinking water
into the kettle (at least 0.3 litre/MIN).
Always remove the kettle from the power
base and wait until the kettle cooled down, before filling the kettle.
Do not operate
the appliance with the kettle empty. However, Do not fill in more than the maximum
amount (1.0 litre / MAX). If the kettle is overfilled, boiling water may splash out.
Always ensure to hold the kettle level, when it is filled. Do not leave water in the kettle
after use, to avoid excessive build-up of scale.
1. Place the power base on a suitable table or counter near an appropriate wall
power outlet.
2. Remove the kettle from the power base and open the lid. To pull the lid open,
grasp into the hollow in the lid.
3. Fill the desired amount of clear drinking water into the kettle,
between MIN (0.3
litres) and MAX (1.0 litres)
. Always keep the kettle level, as soon as it is filled.
4. Close the lid by pressing the lid down until it settles in place.
IMPORTANT:
When filling the kettle, ensure not to spill water onto the exterior of
the kettle. If required, wipe dry the exterior of the kettle, before placing the kettle
onto the power base. Do NOT operate the kettle with the lid open. Otherwise, the
temperature control and automatic shut-off will not work properly. Additionally, there
will be high energy loss.
5. Ensure that the exterior of the kettle is dry. Then place the kettle onto the power
base and connect the appliance to the power supply. A beep sounds and the
display is illuminated, showing the actual water temperature or two dashes, if
the water temperature is below 30°C. The appliance is now ready for operation
(standby mode).
WARNING
—
Risk of Scalds:
The exterior of the kettle will get hot during ope-
ration. Only touch the kettle at the operating elements and handle. Even with the lid
closed properly, hot steam could escape from under the lid during operation and
some minutes thereafter. Do not hold your face, hands, or other parts of your body,
or any delicate objects over or directly beside the kettle, if the kettle is still hot.
Содержание 42435
Страница 47: ...47 ...