39
note:
The seal on the lid can be removed and washed separately. However, do not use any
hard or sharp-edged objects for removing and cleaning the seal to avoid damage to lid and
seal.
5. Wipe the power base with a soft, damp cloth.
wArnIng:
Always ensure that the appliance and all parts of it are
out of reach of
young children.
6. Dry all parts of the appliance thoroughly and let all parts dry naturally were they are
out
of reach of young children.
7. If you removed the seal, then put the seal into the groove of the lid.
sTOrAge
wArnIng:
Young children must be supervised that they do not play with the appliance or
any part of it.
The frothing discs could be swallowed by young children, thus
causing risk of suffocation.
Jug, lid and measuring cup get very hot during operation. Al-
ways unplug the appliance when it is not in use. Let the appliance cool down, before cleaning
or storing the appliance. Always clean the appliance and all its parts before storing to avoid
accumulation of dried-on food (see: ‚Care and Cleaning’).
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and
inadmissible strain (mechanical or electric shock, heat, moisture) and where it is
out of reach
of young children
. Place the appliance on a clean and stable surface, where it cannot fall.
Do not place any hard or heavy objects on the appliance or any part of it.
Always handle the power cord with care. Power cords may never be knotted, twisted, pulled,
strained, or squeezed.
Do not use any parts or accessories of the appliance for any other purpose than operating
the appliance. It is good advice to store the parts and accessories of the appliance with the
appliance.
1. Ensure that the appliance is switched OFF (indicator is illuminated continuously or dark)
and unplug the appliance. Let the appliance cool down, than clean the appliance and its parts
before storage (see: ‚Care and Cleaning’).
2. Loosely wrap the power cord around the cord wrap in the bottom of the power base.
3. Place the jug on the power base.
4. Insert the frothing discs into the jug.
Alternatively, you can put one of the frothing discs on the on-board disc storage at the rear of
the appliance.
5. Place the lid on the jug and insert the measuring cup in the lid.
CAuTIOn:
Do not hold the appliance by the jug, power cord or lid for moving the appliance.
To move the appliance, always hold the power base at both sides near the bottom to avoid
damage.
6. Grasp the power base with both hands at its sides, and place it on a suitable surface,
where it cannot fall, and is
out of reach of young children.
