Care and Cleaning
WARNING:
To avoid injury to persons and damage, always release the on/off button,
wait for the motor to stop completely and unplug the appliance immediately after operation
and before laying down, dismantling or cleaning the appliance. With the appliance
connected to the power supply,
do not
touch the assembled blending tool with your hands
or any objects.
The blender blades are very sharp!
Do not
touch the blades. To handle the blending tool,
always grasp the shaft.
DO NOT
place the appliance or power cord in an automatic dishwasher.
Do not
immerse the motor housing or power cord in any liquids or spill any liquids on it.
Always wipe off spilled liquids immediately.
Do not
pour or drip any liquids on the motor
housing or power cord.
Do not
place the appliance on wet or damp surfaces. When liquids
are spilled on the motor housing, immediately unplug the appliance and dry the motor
housing to avoid risk of electric shock or fire. Always handle with care and without violence.
CAUTION: Do not
use abrasive cleaners, cleaning pads, corrosive chemicals
(disinfectants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning,
for this could damage the surfaces. Carefully clean the appliance and the vessle with a
damp sponge or cloth and warm soapy water. Soak stubborn residues on the processing
tools in warm dish-water for ca. 10 minutes and then remove the residues with a soft
washing brush. For your convenience, you can clean the blending tool in an automatic
dishwasher (in the cutlery tray).
1. Release the on/off button, wait for the motor to stop completely and unplug
the appliance from the power outlet.
CAUTION:
Always handle with care and without violence. To disassemble
the processing tools, press the lockingsystem to release the lock.
2. Remove the processing tool.
Hold on to the motor housing with one hand and grasp the shaft with the other
hand. Press the locking system to release the lock. Then remove the processing
tool.
3. Clean the processing tool (blender blades) with a soft nylon washing brush
and warm dish-water. Rinse the processing tools thoroughly under running
water.
•
Do not
touch the blades with your hands to avoid injury. Only immerse the bell-shaped
blade box.
• For your convenience, you can clean the blending tool in an automatic dishwasher (in
the cutlery tray).
• Soak stubborn residues in warm dish-water for ca. 10 minutes before cleaning.
4. Wipe the motor housing and power cord with a damp soft cloth. Take care not to spill or
drip water or any other liquids on the motor housing.
18
