Storage
The Design Food Processor Advanced is designed so that most
attachments can be stored within the unit itself. This way you avoid
touching the blades unintentionally.
Unique drawer design enables attachments such as the reversible
shredding disc, reversible grating and shaving disc, the julienne
disc and the spatula to be stored conveniently within the appliance
when not in use.
1.
Slide out the storage drawer at the base of the food processor.
(picture A).
2.
Place spatula on bottom of storage drawer as indicated (picture B).
3.
Place one of the 'Reversible discs' in storage drawer as indicated
(picture C).
4.
Place the 'Julienne Disc' in the storage drawer as indicated (picture
D).
5.
Place the remaining 'Reversible Disc' in on top of the first 'Reversible
Disc' as indicated (picture E) and close the drawer.
Assemble the appliance for storage (picture F):
A.
Place the bowl on the motorblock turning it anticlockwise until it is
securely locked in position. Do not use any force. The handle should be
facing the front which is above the control panel (picture A).
B.
Fit the spindle onto the drive shaft, in the middle of the processing
bowl (picture B). The long shaft of the spindle has to slide over the
drive shaft and the end with the aglet should face upright. If
necessary turn the spindle a little to fit in position. The spindle sticks
out of the processing bowl for 1 or 2 cm.
C.
Fit the universal 's' blade over the spindle and press firmly into
place. Ensure the blade is securely locked on the spindle. The blade
is correct assembled if the central plastic section faces upwards and
flushes with the wider part of the spindle. The blade is placed a few
millimetres above the bottom of the processing bowl.
D.
Fit the variable slicing disc over the spindle. The side with the
blade has to face upwards.
E.
Take the lid and place it on top of the processing bowl according to
the instructions ´Operating with the normal processing bowl`).
F.
Fit the food pusher including the internal pusher into the feed
chute and place the food collector underneath the processing
bowl chute. You can store the small universal ‘s’ blade inside the
food collector.
16
A
handle
B
C
D
E
F
40965_designfoodprozessoradvanced_manual_english.qxp 29.01.2008 12:19 Seite 16
