Gason 7390, Руководство оператора

Страница: 35 / 110

Operation
– VRT Drive
Page 31
07/18
Setting the Spreader Width
The spreader width setting can be revised
on the measurement screen which is accessed
via the Machine menu. Refer to Fig.53 for a visual
layout.
Fig. 53 Setting the Spread width in the Machine setting
section of the monitor.
Alternatively, you can adjust the current
width of spread setting from the main operating
screen as long as the increment setting has a
value (factory set is 1 metre increments).
Fig.54 Adjusting spread width from operating screen.
Checklist of Monitor Setup
Before starting to spread your product, it
is best to check all items have been setup
correctly using the Checklist below (refer Fig.55).
Checklist of VRT monitor information that must be set before spreading
Item Screen Location Example Importance

Spread Width
Main Operating Screen or ‘
Measurement
s’ screen.
36m Critical
Application Rate Bin 1 Setup Menu/Rate or
Main Operating Screen
80kg/Ha Critical
Rate Steps Bin 1 Setup Menu/Rate 20kg/Ha Optional
Gate Setting Bin 1 Setup Menu or
Main Operating Screen
70mm Critical
Product Name Bin 1 Setup Menu/Prod. Urea Critical
Bulk Density Bin 1 Setup Menu/Prod.
(use red scales to check)
0.75kg/L Critical
Flow Factor Bin 1 Setup Menu / Prod. /Calibrate/Flow Factor 100% Critical
Job Applied Main Operation. Screen/Tab 2 __Ha Optional
Fig. 55 VRT Drive Monitor Set-up information relevant to the Farmscan Ag 7300 monitor.
It is highly recommended that you fill out the Application Record Sheet (refer page 34) once the
spreader is setup and the operator is happy with its performance. By doing this, it will give the operator
a quick setup information if spreading the same material in the future.