manualshive.com logo in svg

Gasolec S Series, Руководство пользователя

Поделиться
Скачать
Gasolec S Series Скачать руководство пользователя страница 4

 

© Gasolec                               Exchanging Ceramic Stone Gasolec S-Type heaters - 15-06-2020.doc                              4/4 

 

 
7. Press gently with the help of a tool the last frame list in its position. 
 
  

 

 

 
8. Place the stone clips + thermocouple holder in the corners and as shown in the picture 
 
Afterwards the steel grid and the reflector ( the holes in the reflector should be on the opposite 
side of the gas inlet) can be placed and the screws tightened. 

 

                                                                               .

 

 

Содержание S Series

Страница 1: ...d and the surface is clean Prepare all the necessary parts like stone 2 clips 2 frame lists long and 2 frame lists short Please note that on the ceramic stone the holes on two sides are closer to the edge then on the other two sides The sides with the holes closest to the edge is more fragile 2 Place the short frame list in the short side of the of the burner house as shown on the picture ...

Страница 2: ...er side The lumpy side must be up Facing the steel grid Place the stone with the holes close to the side first against the frame lists 4 Press the stone firmly with the help of a tool against the frame lists and hold this in position with your hand Make sure the tool used is strong and wide enough to have a large pressing surface otherwise the ceramic stone will be damaged Do NOT use a screwdriver...

Страница 3: ... the short side position and press it gently in the gap next to the stone and the housing with a steel or wooden tool Take care of not damaging the stone 6 Press with the help of a tool the stone against the frame list creating a space for the last frame list and hold it in position with the other hand ...

Страница 4: ...he help of a tool the last frame list in its position 8 Place the stone clips thermocouple holder in the corners and as shown in the picture Afterwards the steel grid and the reflector the holes in the reflector should be on the opposite side of the gas inlet can be placed and the screws tightened ...

Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды