9
8
PRODUCT DIMENSIONS
(FRONT/REAR VIEW)
(SIDE VIEW)
914mm
900mm
576mm
545mm
933mm
609mm
265mm
40mm FOOT HEIGHT ADJUSTMENT
239mm
(TOP VIEW)
933mm
609mm
VENTING
VENTING
WARNING
This drop-in BBQ is designed to sit flush with the
bench. However, if you choose to install the BBQ on top
of the stone bench, you need to make sure the legs are
supporting the BBQ.
The appliance requires venting. When the BBQ is sitting
flush with the bench, there is an approximate 2mm gap
around the BBQ edge with the bench. This gap plays
an important role of venting, therefore, it should not
be sealed with silicon. If you choose, however, to seal
the gap, a rectangular unimpeded opening of approx
750mm W x 10mm H in either the front or the rear
should be incorporated within the cabinet. Please refer
to diagram below as an example.
916mm
580mm
BENCH CUT-OUT DIMENSIONS
936mm
612mm
The cutout size, when sitting the BBQ
flush with the stone bench
Feet Adjustment:
4 adjustable feet are supplied with the BBQ. Please ensure
all 4 feet are attached to the BBQ for height adjustment. If
you plan to install the drop in BBQ in our Alfreco Plus BBQ
cabinet module, please adjust the feet of the BBQ so that
overall height is 290mm. Adjust the feet of the BBQ so all
edges sit flush. If you choose to build your own cabinet,
please adjust the feet height accordingly.
Drip tray access:
Please note that you must allow access under
the BBQ for the drip tray to be removed.
UNDER BENCH CLEARANCE:
150mm ALL AROUND SIDE WALLS OF BBQ
The cutout size, when sitting the BBQ
on top of the stone bench
