manualshive.com logo in svg

Gasmate HYDRA GM172-15, Инструкция по эксплуатации, Страница: 15 / 24

Поделиться
Скачать
Gasmate HYDRA GM172-15 Скачать руководство пользователя страница 15

15

14

14

15

ASSEMBLY INSTRUCTIONS

STEP 32

Attach the regulator to your gas cylinder.

STEP 33

Turn on the gas cylinder ensuring that all of the controls 
on the BBQ are turned OFF at this point. DO NOT 
ATTEMPT TO LIGHT THE BBQ.

STEP 34

Use a solution of soapy water (dishwashing liquid and 
water is fine). Brush it on or use a spray bottle as shown in 
the drawing. Ensure the connections have a good coating.

STEP 35a

If the connection is leaking, bubbles will start to grow in 
the soapy solution. If this happens shut off the gas supply 
at the cylinder.

STEP 35b

Tighten the connections using a crescent then repeat 
steps 33-34.

STEP 35c

The connection is gas tight when no bubbles grow 
around the gas connection.

Step 12

Attach the regulator to your gas cylinder. 

Step 13

Turn on the gas cylinder ensuring that all of the 

controls on the BBQ are turned OFF at this point.

DO NOT ATTEMPT TO LIGHT THE BBQ!!.

Step 14

Use a solution of soapy water (dishwashing liquid 

and w

ater is fine). Brush it on or use a sp

ray 

bottle as shown in the drawing. Ensure the 

connections have a good coating.

Step 15a

If the connection is leaking, bubbles will start to 

grow in the soapy solution. If this happens shut 

off the gas supply at the cylinder. 

Step 15b

Tighten the connections using a crescent then 

repeat steps 13-14.  

Step 15c

The connection is gas tight when no bubbles 

grow around the gas connection.

Step 12

Attach the regulator to your gas cylinder. 

Step 13

Turn on the gas cylinder ensuring that all of the 

controls on the BBQ are turned OFF at this point.

DO NOT ATTEMPT TO LIGHT THE BBQ!!.

Step 14

Use a solution of soapy water (dishwashing liquid 

and w

ater is fine). Brush it on or use a sp

ray 

bottle as shown in the drawing. Ensure the 

connections have a good coating.

Step 15a

If the connection is leaking, bubbles will start to 

grow in the soapy solution. If this happens shut 

off the gas supply at the cylinder. 

Step 15b

Tighten the connections using a crescent then 

repeat steps 13-14.  

Step 15c

The connection is gas tight when no bubbles 

grow around the gas connection.

Step 12

Attach the regulator to your gas cylinder. 

Step 13

Turn on the gas cylinder ensuring that all of the 

controls on the BBQ are turned OFF at this point.

DO NOT ATTEMPT TO LIGHT THE BBQ!!.

Step 14

Use a solution of soapy water (dishwashing liquid 

and w

ater is fine). Brush it on or use a sp

ray 

bottle as shown in the drawing. Ensure the 

connections have a good coating.

Step 15a

If the connection is leaking, bubbles will start to 

grow in the soapy solution. If this happens shut 

off the gas supply at the cylinder. 

Step 15b

Tighten the connections using a crescent then 

repeat steps 13-14.  

Step 15c

The connection is gas tight when no bubbles 

grow around the gas connection.

Step 12

Attach the regulator to your gas cylinder. 

Step 13

Turn on the gas cylinder ensuring that all of the 

controls on the BBQ are turned OFF at this point.

DO NOT ATTEMPT TO LIGHT THE BBQ!!.

Step 14

Use a solution of soapy water (dishwashing liquid 

and w

ater is fine). Brush it on or use a sp

ray 

bottle as shown in the drawing. Ensure the 

connections have a good coating.

Step 15a

If the connection is leaking, bubbles will start to 

grow in the soapy solution. If this happens shut 

off the gas supply at the cylinder. 

Step 15b

Tighten the connections using a crescent then 

repeat steps 13-14.  

Step 15c

The connection is gas tight when no bubbles 

grow around the gas connection.

Step 12

Attach the regulator to your gas cylinder. 

Step 13

Turn on the gas cylinder ensuring that all of the 

controls on the BBQ are turned OFF at this point.

DO NOT ATTEMPT TO LIGHT THE BBQ!!.

Step 14

Use a solution of soapy water (dishwashing liquid 

and w

ater is fine). Brush it on or use a sp

ray 

bottle as shown in the drawing. Ensure the 

connections have a good coating.

Step 15a

If the connection is leaking, bubbles will start to 

grow in the soapy solution. If this happens shut 

off the gas supply at the cylinder. 

Step 15b

Tighten the connections using a crescent then 

repeat steps 13-14.  

Step 15c

The connection is gas tight when no bubbles 

grow around the gas connection.

Step 12

Attach the regulator to your gas cylinder. 

Step 13

Turn on the gas cylinder ensuring that all of the 

controls on the BBQ are turned OFF at this point.

DO NOT ATTEMPT TO LIGHT THE BBQ!!.

Step 14

Use a solution of soapy water (dishwashing liquid 

and w

ater is fine). Brush it on or use a sp

ray 

bottle as shown in the drawing. Ensure the 

connections have a good coating.

Step 15a

If the connection is leaking, bubbles will start to 

grow in the soapy solution. If this happens shut 

off the gas supply at the cylinder. 

Step 15b

Tighten the connections using a crescent then 

repeat steps 13-14.  

Step 15c

The connection is gas tight when no bubbles 

grow around the gas connection.

Содержание HYDRA GM172-15

























Отзывы:

Нет отзывов