OPERATING PROCEDURE
To adjust the flame or temperature of the hot plate,
use the gas cylinder valve.
Rotate the gas cylinder valve anti clockwise to open
and increase the flame and heat.
Rotate the gas cylinder valve clockwise to close and
lower the flame and heat.
Spillage
Turn off the cylinder gas valve. Wait for the flame to
go out. Using heat proof gloves:
• Remove cooking pan.
• Blow liquid from burner ports.
• Tip burner upside down to drain spilled liquid.
• Once dry re-position.
• Follow lighting procedures to re-light burner and
continue cooking.
6
LIGHTING PROCEDURE
Burner Operation &
Ignition System Check
1. Turn gas valve on.
2. Light burner immediately with a long
BBQ match.
3. Once burner is lit place the cooking pan on top
of the burner.
4. To ensure cooking fat drips into the fat cup, line
up the top and bottom handles
IMPORTANT
• Outdoors use only
• Do not smoke when attempting to ignite
appliance.
• Always use protective gloves when handling
hot components.
• Do not smoke at any time when attempting
to ignite the appliance burners.
Caution
:
Do not move the appliance while in operation.
• Do not leave the appliance unattended
when alight.
NOTE: ONLY USE ON A
NON-COMBUSTIBLE SURFACE
After Use
Turn the gas cylinder valve off and wait for the flame
to go out.
WALL
GROUND
NON COMBUSTIBLE MATERIAL/SURFACE
500mm
MIN
500mm
CLOSE/OFF
OPEN/ON
INCREASE
HEAT
DECREASE
HEAT
Gas Tube Assembly
Gas Jet/Cylinder Connection
Camping cylinder valve
(not included)
Camping cylinder
(not included)
Camping cylinder gas valve
Problem
Possible Reason
Solution
Burner will not ignite
Valve on gas bottle closed.
Open valve on gas bottle.
Valve on gas bottle not open enough.
Open valve on gas bottle more
.
Gas bottle empty.
Fill gas bottle.
Food is not cooking
or is taking too long
Burner has gone out.
Check that the gas bottle is not
empty and re-ignite burner.
