Gasmate GM152-155, Быстрый старт, Страница: 10 / 14

11 10
OPERATION
IMPORTANT
Do not smoke at any time when attempting to ignite
the barbecue burner.
Do not leave the barbecue unattended when alight.
BURNER OPERATION & IGNITION SYSTEM CHECK
Problem Possible Reason Solution
Burner will not ignite
Control knob is closed Turn knob to high when lighting
Igniter is faulty Use a long barbecue match inserted through the
hole on under side of barbecue
Food is not cooking
or is taking too long
Burner has gone out Check that the gas bottle is not empty and re-
ignite the burner
Cooking surface was not given
enough time to warm up before the
food was applied Remove the food and give the burner time to
warm the cooking surface (5-10 mins)
There is too much food on the
cooking surface Cook smaller portions
OPERATING PROCEDURE
Cooking
The control knob can be turned from ‘HIGH’ to ‘‘LOW’
depending on the heat required.
With the hood down the burner must only be used on
‘LOW’.
Servicing
Servicing should be conducted every year or sooner if
required.
The appliance must only be serviced by an authorised
person.
IMPORTANT
• IMPORTANT: Before connecting and disconnecting
barbecue to gas source, make sure burner
controls are in ‘OFF’ position.
• CAUTION: When the barbecue is not in use, the
gas cylinder must be disconnected.
• Check that the seals between the appliance
and the gas cylinder are in place and in good
condition before connecting the gas cylinder.
• Do not use this appliance if it has damaged or
worn seals.
• Check performance of burner prior to installing
barbecue plate.
• Do not smoke when attempting to ignite
barbecue.
• Never use volcanic rock, heat beads or other
material.
• Always use protective gloves when handling hot
components.