7
6
To Tilt Head
Note: Always ensure that the heater is switched
off, disconnected from the mains power supply
and is cold to touch. If heater has been recently
used, please leave the wall heater one (1) hour to
cool before tilting head.
1. Loosen the locking bolt and remove.
2. Loosen the head tilt bolt, do not remove.
3. Head can be tilted through 30°.
4. Tighten the head tilt bolt when the desired
angle is achieved.
5. Insert and tighten the locking bolt if possible to
stop any unintentional movement of the heater.
Note: If locking bolt can not be fitted ensure the
head tilt bolt is very tight.
Head Tilt Bolt
28°
Ceiling Mount with Chain
Only use this mounting option if your ceiling is too
high.
1. Attach the bracket (C) as noted below.
2. Cut chain (D), not supplied, to desired length.
3. Using nut and bolt attach chain to bracket (C) and
bracket (B).
4. Heater is now mounted and ready for use.
Ceiling Chain Mount
(C) Ceiling
Bracket
(D) Chain,
not supplied
(B) Heater
Rear Bracket
(A) Heater
Body
(A) Bolt & Nut,
not supplied
Locking Bolt
