GENERAL ASSEMBLY
LIGHTING THE COOKER
1. Turn the gas cylinder valve on, in an anti-clockwise
direction for one full turn.
ADJUSTING HEAT OUTPUT
1. Turn the gas control in an anti-clockwise direction
to achieve a higher flame and in the clockwise
direction for a lower flame or to turn off.
Note: Locate the gas cylinder away from your cooker to
ensure it is not subjected to radiant heat.
TURNING THE APPLIANCE OFF
If the appliance is no longer to be used and to reduce
the risk of blocked gas jets caused by excess gas being
left in the hose, all remaining gas must be expelled from
the hose assembly.
1. With the flame still operating, turn the valve on the
gas cylinder in the clockwise direction until it is off.
Allow the flame to burn down then extinguish once
all remaining gas in the hose has been used.
6
7
2. Using long BBQ matches or gas lighter, position
close to the edge of the burner to be ignited, slowly
turn the gas control in an anti-clockwise direction
approximately ¼ of a turn.
3. If the burner does not ignite, turn the gas control in
the clockwise direction to the “OFF” position and
allow the residual gas to disperse before attempting
to reignite the burner.
STORING APPLIANCE
1. Wait for appliance to cool and disassemble all parts and place in pot.
2. Position frame over pot and allow to settle.
3. Place in storage bag.
OFF
HIGH
LOW
OFF
2. Turn the gas controls on the appliance clockwise to
the “OFF” position.
