background image

9

8

Smoked Salmon

140g x 4 portions Salmon
1 Cup / 120ml maple syrup
1 Tablespoon / 15ml Butter
Coarse Salt
2 handfuls smoking chips or pellets, your favourite 

flavour

Clean each fillet of salmon taking care to remove 

all bones and the skin.
Place in fillets in a shallow baking dish and pour 

maple syrup over the top, turn each fillet to coat 

evenly.
Sprinkle with salt, cover and refrigerate for 24 hours.
Place your favourite flavour smoking chips or 

pellets into smoker box and prepare the smoker.
Starting with a high heat of 90°C to get a strong 

scent of your favourite smoke.
Place seasoned fish onto the cooking rack and 

cook for around 1 1/2 hours to 2 hours.
When ready to remove the salmon from the 

smoker, prepare the butter in a small frying pan.
Place the fillets into the hot butter in the frying pan 

and cook gently for about 2 minutes per side.
Remove from the frying pan and serve.

Smoked Barbecue Baby Back Ribs

Total Time: 3 hrs 30 mins
Active Time: 30 mins
Makes: 3 racks, about 45 ribs

Ingredients
3 tablespoons salt
2 tablespoons packed dark brown sugar
2 tablespoons Mexican mild chili powder
2 - 3 tablespoons smoked paprika  

(depending on taste)
1 teaspoons freshly ground black pepper
1/2 teaspoon cayenne pepper
1 teaspoon ground cumin
1 teaspoon garlic powder
½ - 1 teaspoon ground mustard seeds (depending 

on taste)
3 full racks baby back pork ribs (about 1kg)
3 tablespoons vegetable oil
2 cups barbecue sauce

Instructions
Remember you are smoking and this is a slow 

process.  Also if you are looking then you are not 

smoking.

1.  Combine the salt, sugar, and spices in a small 

bowl, using a fork to break up any chunks; 

cover and set aside for at least 15mins.

2.  Pat the ribs dry with paper towels and place 

on a work surface. Remove the thin membrane 

attached to the underside of the ribs by doing 

the following: Flip the ribs over so they’re 

bone-side up. Starting at the end of 1 rack, 

slide the tip of a paring knife between the 

membrane and the bone, then lift and cut 

through the membrane.

3.  Rub the ribs all over with the vegetable oil, 

evenly sprinkle with the spice mix. Place the 

ribs on a baking sheet, cover with plastic wrap, 

and refrigerate for at least 30 minutes and up 

to 8 hours. When ready to cook, remove the 

ribs from the refrigerator and let them come to 

room temperature, about 30 minutes.

4.  Prepare the Gasmate smoker as per the 

instructions, ensuring to use water in the water 

tray and your favourite smoking pellets/chips 

in the smoking box.

5.  Place the ribs into the Gasmate smoker, 

ensuring 1 rack of ribs per cooking grate, bone 

side down.

6.  Smoke for at least 45mins at around 65degs.

7.  Once the smoke starts to die down. Slather 

some barbecue sauce on the rib racks.

8.  Start to close some of the air vents and work 

the smoker up to around 90-100degs.

9.  Cook the racks of ribs for a further 2 – 2 1/2 

hours. Check for doneness by lifting up one 

end of a rib rack. The rack should bend slightly 

in the middle. If it does not bend, continue to 

cook,  until it does bend.

10. Serve the ribs warm with extra sauce

Содержание BQ2050W





















Отзывы: