Gasmate AVENIR GM172-146 Скачать руководство пользователя страница 19

19

18

CARE & MAINTENANCE

As with all appliances, proper care and maintenance 
will keep them in top operating condition and prolong 
their life. Your new gas barbecue is no exception. By 
following these cleaning procedures on a timely basis, 
your barbecue will be kept clean and working properly 
with minimum effort.

Flash-Back 

If fire occurs in and around the burner, immediately turn 
off gas at its source and turn the burner control to OFF, 
wait until the barbecue has cooled, then clean the burner 
tubes and burner ports as described in lighting and 
operating procedure.
Spiders and small insects occasionally spin webs or 
make nests in the burner tubes during warehousing and 
transit. These webs can lead to a gas flow obstruction 
which could result in a fire in and around the burner 
tubes. Cleaning with a soft brush before use and at least 
every six months is recommended.
This type of fire is known as ‘FLASH-BACK’ and can 
cause serious damage to your barbecue and create an 
unsafe operating condition for the user. Although an 
obstructed burner tube is not the only cause of ‘FLASH-
BACK’ it is the most common cause and frequent 
inspection and cleaning of the burner tubes is necessary.

Cleaning the Cooking Surface

After cooking, turn burner control to OFF and let 
barbecue cool before attempting to clean your grill 
plates. Before first use and periodically, it is suggested 
that you wash the grill plates in a mild soap and warm 
water solution.

Care of Cooking Surface

Use and care of the cooking surface is important. Do not 
use pans on the cooking surface. Do not overheat the 
cooking surface with the hood down or no food on the 
cooking surface.

Cleaning the Drip Tray

To avoid fat or grease dripping from the barbecue remove 
and empty the drip tray after each use. Wait until the drip 
tray is cool to touch before disposing of contents.
The drip tray should be washed periodically in a mild 
detergent and warm water solution.
Refer to Care & Use Guidelines for more information.

  IMPORTANT: 

•  Beware of spiders and wasps. Burner tube should 

be inspected and cleaned periodically.

•  This appliance must only be serviced by an 

authorized person.

•  To avoid any flare-ups, it is recommended that 

the drip tray be checked and emptied regularly. 
Contents of the drip tray may be very hot during 
cooking. If emptied during extended cooking 
extreme caution should be taken and direct 
contact by hand should be avoided at all times. 
Allow to cool completely before disposing of the 
contents.

Содержание AVENIR GM172-146

























Отзывы: