GASER S1500-P, Руководство пользователя

Страница: 14 / 26

-14-
9. TROUBLESHOOTING
The table below lists the problems that might occur with the machine, their potential causes and how
to solve them.
Problem Cause Solution
The machine does not start
Machine is not connected to
the air network
Connect the machine to the network
Insufficient air pressure See manual
“6.2. Start-up”, point 2
The door is not properly closed Close the door properly
Ram limit switch poorly
adjusted
See manual
“6.2. Start-up”, point 6
There is air pressure but the
machine still will not start or
runs very slowly
Internal air leak
See manual
“8. Maintenance”, points 3
and 4
Valve or manifold in poor
condition
See manual
“8. Maintenance”, point 4
The machine makes a noise
Internal components not
lubricated
See manual
“8. Maintenance”, point 1
The ball joint does not turn
Anti-rotation bearing broken or
in poor condition
See manual
“8. Maintenance”, point 2
Mixture too thick Thin the product
Meat leaking from the former
unit
Cap nuts not tightened
properly
See manual
“6.2. Start-up”, point 10
Seals in poor condition See manual
“8. Maintenance”, point 3
Split bearings or ball joint worn
or in poor condition
See manual
“8. Maintenance”, point 2