Gasboy SERIES 1000, Руководство пользователя

Страница: 16 / 22

Series 1000 to FleetKey Conversion
03/07/03 11
START-UP COMMANDS
Use the following commands to set up the system at the initial start-up. The Series 1000 FleetKey
Operation Manual describes these commands in more detail. In the examples, bold represents
the information that you enter, and this symbol
↵
represents the RETURN key.
1.
Press CTRL F or RETURN. The system displays: SIGN ON:
2. Type
GASBOY and press RETURN. (The word GASBOY is shown in the illustration for
example only. You will not see the word GASBOY as you are typing it.) The asterisk prompt
*
appears indicating that you are in Command Mode and can begin entering commands to
configure your Series 1000 System.
7-+232+%7&3=
↵
3. Type
LS to change the initial password (GASBOY) to one of your choice (up to 10
characters).
07
4%77;36(4%77;36(
↵