Installing OrPT Barcode Kit and Cover
Page 8
MDE-5262A Barcode Reader Installation and Setup Instructions · May 2016
11
Replace the flat cover with the profound barcode/card reader cover provided in the kit
(see
).
Figure 6: Replacing Bottom Rear Cover
12
Ensure all connections are correct before closing the panel.
13
Place the rear panels on the terminal and secure them using the seven M3 screws removed in
on
Figure 7: Closing Terminal
14
Place the OrPT on the cabinet.
15
Secure the OrPT to the housing clamp using the two wing nuts removed in
on
16
Connect grounding, communication, power, and Local Area Network (LAN) cables.
17
Lock the cabinet door lock using the dedicated key.
