Gasboy ORPAK CFN PLUS, Руководство по установке

Страница: 36 / 90

MDE-4813D CFN PLUS Installation Manual · February 2018
26
Table 2-2. CFN PLUS, Cable Types
No. Function Type
1 AC Power from Office
Power cable, 3x1.5 mm
2
NYY (14 AWG), in
accordance with local standards
Control to pumps (valves or engine)
In-use signal
2 Coil (Barrier)
Data communication cable, 300 V RMS, 90ºC,
shielded twisted pair, oil resistant, 24 AWG,
low capacitance below 60 PF/meter similar to
Belden 9729 cable
Pulser
TLG (RS-232)
3 LAN
CAT-5E, Shielded, 300 V RMS, 90ºC similar
to Belden 121700 A
4 GND Ground cable 0.4” (10.8 mm
2
)
2-6.3. Cables Routing
Route the cables from the peripherals and the Office to CFN PLUS as listed in Table 2-3 and shown
in Figure 2-3 . Proceed as follows:
Table 2-3. CFN PLUS, Cable Routing
No. Functional Description From Through Insert Cable Type (*)
1 Power AC Office High voltage conduit 1
2 GND Office High voltage conduit 4
3 TLG Office Low voltage conduit 2
4 LAN Office Low voltage conduit 3
5 Control, Pump A Pump A High voltage conduit 1
6 In-use, Pump A Pump A High voltage conduit 1
7 Pulser, Pump A Pump A Low voltage conduit 2
8 Barrier coil, Pump A Pump A Low voltage conduit 2
(*) Refer to Table 2-2 .