![background image](http://html1.mh-extra.com/html/gasboy/islander-prime/islander-prime_instruction-and-installation-manual_3666678076.webp)
Installation
5.5 Installing Communication Interfaces
Page 64
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
5.5.5.2 Current Loop
The following shows the specific wiring connections between Islander Prime and the Current
Loop pump nozzle, the terminals that differ from the mechanical pump, and the serial
connection between two Current Loop pumps and the terminal block (see
Figure 53: Current Loop Electronic Pump - Wiring Diagram
The Current Loop electronic communication interface is wired according to the following
pinout scheme (see
):
Table 15:
GND1
GND2
CHSS
GND3
GND4
CHSS
CLI_1
CLI_2
n.c.
CLI_3
CLI_4
n.c.
CLO_1
CLO_2
n.c.
CLO_3
CLO_4
n.c.
Current Loop Pinouts
Содержание Islander Prime
Страница 4: ...This page is intentionally left blank...