![background image](http://html1.mh-extra.com/html/gasboy/islander-prime/islander-prime_instruction-and-installation-manual_3666678073.webp)
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Page 61
5.5 Installing Communication Interfaces
Installation
5.5.4.1 Electronic Pulser - Three-Wire Pulser
Note: A three-wire pulser requires an external power source (12 V) in order to operate.
The following is a schematic diagram of the connections between the terminal block and a
three-wire pulser (see
Figure 49: Three-Wire Pulser Wiring Connections
5.5.4.2 Mechanical Pulser - Two-Wire Pulser
The following is a schematic diagram of the connections between the terminal block and a
two-wire pulser (see
):
Figure 50: Two-Wire Pulser Wiring Connections
Содержание Islander Prime
Страница 4: ...This page is intentionally left blank...