![background image](http://html1.mh-extra.com/html/gasboy/atlas/atlas_owners-manual_3685456062.webp)
The Atlas Fuel System
Preventive Maintenance
Page 3-52
MDE-4363G Atlas™ Fuel Systems Owner’s Manual · August 2018
Safety Warnings
Follow all safety precautions to prevent injury when inspecting a pump/dispenser at the
islands.
General Inspections
Perform a general inspection of each pump/dispenser as follows:
• Each week to ensure that all pumps/dispensers are operating properly
• Whenever you receive a complaint about potential unit problems
As part of your general inspection, inspect all areas for signs of damage or sharp edges.
Replace any missing or damaged warning labels. Gasboy also strongly recommends that an
ASC inspects the equipment periodically, as outlined in the next subsection.
WARNING
You are performing inspections and maintenance in a potentially dangerous environment of
flammable fuels/vapors and high voltage.
Fire, explosion, or electrical shock could result in severe injury or death if you do not follow safe
procedures.
Read and obey all safety precautions in this manual to prevent potential injury or death.
Leaking fuel can be ignited, causing a fire or explosion.
Fire, explosion, or electrical shock could result in severe injury or death if you continue to use
damaged pumps/dispensers.
If you find any leaks or damage, stop using the pump/dispenser and contact your local ASC.
WARNING
WARNING
Personnel servicing a pump/dispenser can be injured if the pump/dispenser is not barricaded to all
unauthorized personnel and vehicles.
If proper precautions are not taken, the person servicing the unit can be injured by a vehicle.
Before servicing a pump/dispenser evacuate all unauthorized persons and vehicles; then, use
safety tape or cones as barricades.