GAS MAX S2 Series, Руководство пользователя

Страница: 14 / 24

13
HOW TO
INSTALL SUBWOOFER
The MAX S2-10D1/S2-12D1/S2-15D1 uses dual 1 Ohm voice coils, while the MAX S2-10D2
/S2-12D2/S2-15D2 uses dual 2 Ohm voice coils. If you want to connect two or more S2 series
sub- woofers, you can vary the impedance by altering the wiring configuration to use a
series, parallel or series-parallel setup. The more the merrier!
Before installing your brand new subwoofer, make sure that you have everything you need.
Have the right tools ready, and make sure that you have the necessary knowledge/skill to
perform the installation properly. Preparation and knowledge is crucial!
Make sure to look through the recommended wiring schematics below and choose the
setup that corresponds with the number of subwoofers in your sound system. Take note of
the impedance stability of your amplifier. Don’t be afraid to consult your local GAS AUDIO
POWER dealer/installer if you have any questions.
One 1+1 Ohm
subwoofer @ 2 Ohm
Two 1+1 Ohm
subwoofer @ 1 Ohm
It is important to
know the limits of
your amplifier. Be sure
to connect your sound
system with a suitable
impedance to optimize
your sound system.