13
HOW TO
CROSSOVER FUNCTIONS
The two crossover models included with the K2-64 speakers are made to give you a
maximized sound experience! The crossovers consist of one separate high pass and one
low pass filter for each L/R channel. MAX TX02-14 is a 12db tweeter high pass filter with
phase and level settings. MAX WX02-14 is a 6db midwoofer low pass filter. There are several
options to connect the crossovers with both passive and active set-ups (see pages 9 & 10
for wiring schematics).
0dB
-2dB
IN PHASE
OUT OF
PHASE
MA
X
T
XO
2
-
1
4
MAX TX02-14 CROSSOVER:
2
3
1
PHASE SWITCH 0/180
1
Depending on placement, the
phase might need to be shifted
between midwoofer and tweeter.
The switch helps you determine
correct system settings without
the need to change polarity of the
cables at the terminal.
TWEETER LEVEL SETTING
2
Adjust the tweeter level setting
between 0dB or -2dB to affect
the volume. Use -2db for LOUD,
or the 0dB setting for LOUDER!
TERMINAL PORTS
3
Input terminal for amplifier (left
ports) and output terminal for
tweeter (right ports).
HINT!
The correct phase for your setup will always play LOUDER and give you more
presence. This is the two main improvements to listen for when setting the phase
switch correctly. If you are uncertain which is the best setting you can always leave
the switch as factory default “in phase”.
MAX WX02-14 CROSSOVER:
1
3
WOOFER OUTPUT TERMINALS
1
Output terminal for woofer.
WOOFER INPUT TERMINALS
2
Input terminal for amplifier (left
ports).
MA
X
W
XO
2
-
1
4
2
TWEETER OUTPUT TERMINALS
3
Output terminal for tweeter (right
ports).
