GAS MAX EQ2, Руководство пользователя

Страница: 14 / 20

13
TROUBLESHOOTING
NO POWER, NO LIGHTS
• Use a multimeter to check the voltage on the 12V + terminal and REM in.
• Check the fuse on the power cable.
• Check the ground wiring. Use a multimeter to confirm 12V
DISTORTED SOUND
• The source unit may be set too high. Reduce the volume on the source.
• EQ gain controls may be set too high. Re-set the EQ controls to the center.
• Check the settings onthe amplifier, make sure that the gain/level is set accoring to the
instruction. Test so lower the gain/level, to hear if the distortion ends.
• Lower the EQ’s on the GAS MAX EQ.
• Check the speakers, it might be something wrong with the speakers. Too much EQ can
damage a speaker.
UNWANTED NOISE
• Check the negative grounding point, make sure that the surface is clean and have a pure
metal connection. (Ground loop-issues)
• Check that no signal cables are close to the power cables.
• Lower/turn off the Bass EQ function on the amplifier.
• Check your speakers.
NO SOUND
• Wrong input is selected. Press AUX on the front panel to change between Main/Aux input.
• Bluetooth is paired with a device. Unpair or disable Bluetooth on the mobile device.
• Check that all signal cables are correct connected.
• Check speaker wires.
• Check AUX GAIN on the top of MAX EQ
When all above is tested/looked over, and all is as it should be. Consult your local GAS AUDIO
POWER dealer.