GAS MAX A2, Руководство пользователя

Страница: 4 / 32

SAFETY
3
Make sure to pay attention to the instructions when you see this symbol:
Make sure that your vehicle has a 12 VDC voltage negative ground system, that it can
handle an increased power consumption, and that both the alternator and the power
source are healthy and up to the task.
Don’t install the amplifier inside the engine compartment or any other surface that
may be compromised by water or dirt. Your amplifier will produce heat so make sure
it’ll have sufficient air circulation (4-5cm open space on all sides).
Keep the cables inside the vehicle separate from sharp edges or components that may
be affected or take damage. Follow the recommended cable sizes and always use high
quality cables and accessories. Even if you are eager to put the amplifier to use – take
no shortcuts when installing the cables, make sure that all connectors are protected
and secured, and take your time finding the perfect grounding point.
Don’t drill any holes without checking what lies beneath, and don’t cut anything
without making sure that no important components risk being damaged.
There’s a first time for everything, if you need help - ask a friend or contact your local
GAS AUDIO POWER dealer/installer.
We want you to experience your products to the MAX, but we don’t want you to injure
yourself or others. Use common sense, respect high pressure levels and volume, and
follow your local laws and regulations.
NO COMPROMISES! Especially when it comes to safety. Before installing your MAX
A2 series amplifier, make sure that you read through the manual thoroughly and
follow the instructions. Save the manual for future usage and reference!