www.gassense.eu
G
as Sensor
GS-220.P
CHAPTER
3
MOUNT
3.1. Introduction
Warning: gas controller must be mounted only by licensed technician, familiar
with this document or authorized by the manufacturer.
GS-220 is designed for mount via 2 bolts situated cornerwise on the panel. It’s
connected to the gas controller by four core cable.
3.2. Transportation and Storage
During transportation of gas sensor GS-220 specific measures for minimum vibration
and shaking of the unit must be taken. The unit must be transported only in its original
packaging.
Gas sensor could be stored indoors with temperature from -20ºC to +70ºC and
humidity from 10% to 95%. The unit must not be exposed on direct sun light.
Warning: The life of the electrochemical gas sensors expires and their
sensitivity towards the gas decreases with time regardless the fact that they
may not be installed!
3.3. Prior to mount
Before mounting the unit, make sure that:
✔
You are familiar with the safety instructions
✔
You are familiar with the mount instructions (this manual)
✔
You have all parts of the delivery. In case any of the parts is missing contact
your supplier or Invest Electronics Ltd., contacts are listed in Chapter 7, part 7.1.
✔
You have all necessary tools
✔
All connections are not energized during connection
ver.1.0
page 8 / 23