3
OPERATION
CARE AND USE
• Ensure that the product is positioned on a permanent flat, secure, heat resistant, non-flammable
surface away from flammable items.
• Ensure that the product has a minimum of 2m overhead clearance and has a minimum of 2m
clearance from other surrounding items.
• Decide on the location as above.
• The unit may be left outside all year if a cover is used to help protect it from bad weather.
• As this model is made from steel, the surface will age and develop surface rust as soon as it is
placed outside and from first use. This is to be expected, does not affect use and is not a product
fault. Please see below instructions on how to refresh the paint finish if desired.
• To help reduce surface rust, rub the product with an oily rag after each use.
• For safety reasons, always inspect your product prior to use for signs of fatigue and damage, and
replace your model as and when necessary. Continuing to use a damaged unit could cause
personal.
LIGHTING AND REFUELLING
• This product is ONLY suitable for use with charcoal, untreated wood, logs.
• Prepare a stack of loosely crumpled newspaper and place on top of the fuel grate.
• Pile finely split dry firewood or kindling on top of the paper.
• To light the newspaper, use long safety matches or a long nosed lighter.
• Once sufficiently alight, add logs or larger pieces of untreated wood to the unit to increase the
heat slowly.
• DO NOT overload with fuel, only one or two logs is sufficient.
• ALWAYS use heat resistant gloves when adding fuel and replacing the mesh cover, as the unit will
become very hot.
EXTINGUISHING
• To extinguish, stop adding fuel and allow fire to die or douse with sand. DO NOT use water as
this may damage the product.
STORAGE
• When not in use, and if stored outside, cover the product once it has cooled completely with a
cover.