GAS GAS WILD HP 50, Руководство пользователя

Страница: 40 / 60

-
38
-
Changing the coolant
The coolant should be changed periodically to ensure long engine
life.
- Wait for the engine to cool completely.
- Put the QUAD in a horizontal position.
- Remove the radiator cap.
Place a container under the coolant drain plug, and drain the coolant
from the radiator and engine by removing the drain plug at the bottom
of the water pump cover. Immediately wipe or wash off any coolant
that spills on the frame, engine, or wheels.
(A) Water pump
cap.
(B) Coolant
drain plug.
WARNING
Coolant on tires will make them slippery and can cause an accident
and injury.
-Inspection of the coolant. If white cotton-like patches appear in the
liquid then this means that the aluminium elements of the cooling
system are corroded. If the liquid is brown then this means that the
steel or iron parts of the system are oxidized. In either case, clean
out the system.
- Check the cooling system for damage, loose joints, or leaks.
- Install the water pump cover drain plug with the specified torque
shown in the table. Replace all seals with new ones.
Water pump plug:
9 Nm / 0.9 Kgf
- Fill the radiator up to the edge and install the radiator cap.
- Check the cooling system for leaks.
- Start the engine, warm it up and then stop it.
- Check the coolant level after the engine cools down.
AIR FILTER
CAUTION
The air filter must ALWAYS be cleaned after an outing with the
Quad.
Otherwise, dirt may penetrate the engine and damage it seriously.
WARNING
An obstructed air filter will allow dirt to enter into the carburettor and
may cause the throttle slide valve to seize. This is an accident risk!
An obstructed air filter restricts the air intake of the engine, increasing
the petrol consumption and reducing the engine power.
(B)
(A)