GAS GAS TXT 125 2018, Руководство по ремонту

Страница: 77 / 84

Workshop manual
-77-
maintenance of the frame
REAR SHOCK ABSORBER
Settings and configuration
- The preloading of the shock absorber is adjusted by rotating toothed rings (C)
with two special spanners.
- Starting from the standard preloading of 7.5 mm for 300-280-250 and 7 mm
for 125, tighten or loosen, depending on the weight of the rider, reaching a
maximum of 9 mm of preloading. (see spring and preloading table).
- Preloading is the difference in length in mm between a spring when it is ten -
sioned and when it is at rest.
- The rebound or extension is adjusted with the screw. its standard position is 20
clicks from closed. from this starting position, open clicks if faster extension or
rebound is sought and close clicks if slower extension or rebound is desired.
ÖHLINS SHOCK ABSORBER
Rider weight without
equipment (Kg)
K (N/mm) spring
Spring preloading
(mm)
Up to 70 65 7
From 70 to 85 70 7.5
Over 85 75 from 7 to 8.5