GAS GAS TX RANDONNE 2014, Руководство пользователя

Страница: 42 / 44

-41-
MALFUNCTION POSSIBLE CAUSE REMEDY
The motorcycle is unstable - Cable interferes with the handlebar.
- Steering stem locknut too tight.
- Damaged or worn steering bearings.
- Bent steering stem. - Move or loosen the cable just a little.
- Loosen the steering stem locknut.
- Replace the steering bearings.
- Replace the steering stem. Go to a specialized workshop. 9
- Excessive front fork oil.
- Front fork oil viscosity too high.
- Bent front fork.
- Tire air pressure set too high.
- Incorrect rear shock absorber adjustment.
- Insufficient front fork oil.
- Front fork oil viscosity too low.
- Bent front fork.
- Incorrect rear shock absorber adjustment.
- Incorrect drive chain adjustment .
- Worn drive chain.
- Worn rear sprocket teeth.
- Insufficient drive chain lubrication .
- Incorrect rear wheel alignment.
- Insufficient front fork oil.
- Weak or broken front fork spring.
- Worn disc brake.
- Pad installed incorrectly or surface glazed.
- Damaged cylinder.
- Improperly tightened brackets, nuts, bolts.
Shock absorber set too hard
Shock absorber set too soft
Abnormal motorcycle noises
- Pour excess oil until reaching the correct oil level.
- Drain fork oil and fill with correct fork oil viscosity.
- Replace the front fork. Go to a specialized workshop.
- Check tire air pressure.
- Adjust rear shock absorber.
- Fill with fork oil until reaching the correct oil level.
- Drain fork oil and fill with correct fork oil viscosity.
- Replace the front fork. Go to a specialized workshop.
- Adjust the rear shock absorber.
- Adjust the drive chain.
- Replace the drive chain, rear sprocket and the secondary
transmission pinion.
- Replace the rear sprocket.
- Lubricate with appropriate chain oil.
- Align the rear wheel. Go to a specialized workshop.
- Add front fork oil until reaching the correct level.
- Replace the front fork spring.
- Change the disc brake.
- Reinstall or replace pad.
- Replace the damaged cylinder.
- Verify and adjust to the correct torque values.
10
11
12