GAS GAS SM 700 2023 Скачать руководство пользователя страница 67

Страница: 67 / 128

BRAKE SYSTEM 12

» If the brake disc thickness is less than the specified value.

–

Change the brake disc.

–

Check the front and rear brake discs for damage, cracking, and

deformation.
» If the brake disc exhibits damage, cracking, or deformation:

–

Change the brake disc.

12.4

Checking the front brake fluid level

Warning

Danger of accidents

An insufficient brake fluid level will cause the brake system to fail.

If the brake fluid level drops below the specified marking or the specified value, the brake system is leaking or the

brake linings are worn down.

–

Check the brake system and do not continue riding until the problem is eliminated. (Your authorized GAS-

GAS Motorcycles workshop will be glad to help.)

Warning

Danger of accidents

Old brake fluid reduces the braking effect.

–

Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule.

(Your authorized GASGAS Motorcycles workshop will be glad to help.)

V02767-10

–

Move the brake fluid reservoir mounted on the handlebar to a hori-

zontal position.

–

Check the brake fluid level in the level viewer.
» If the brake fluid level has dropped below the marking

–

Add the front brake fluid.

(

p. 65)

12.5

Adding the front brake fluid

Warning

Danger of accidents

An insufficient brake fluid level will cause the brake system to fail.

If the brake fluid level drops below the specified marking or the specified value, the brake system is leaking or the

brake linings are worn down.

–

Check the brake system and do not continue riding until the problem is eliminated. (Your authorized GAS-

GAS Motorcycles workshop will be glad to help.)

Warning

Skin irritation

Brake fluid causes skin irritation.

–

Keep brake fluid out of the reach of children.

–

Wear suitable protective clothing and safety glasses.

–

Do not allow brake fluid to come into contact with the skin, the eyes or clothing.

–

Consult a doctor immediately if brake fluid has been swallowed.

–

Rinse the affected area with plenty of water in the event of contact with the skin.

–

Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact with the

eyes.

–

If brake fluid spills on to your clothing, change the clothing.

Содержание SM 700 2023

































































































































Результаты поиска

Содержание SM 700 2023

Отзывы:

Похожие инструкции для SM 700 2023

Бренды по названию

Популярные бренды

GAS GAS SM 700 2023, Руководство пользователя

Результаты поиска

Содержание SM 700 2023

Отзывы:

Похожие инструкции для SM 700 2023

Бренды по названию

Популярные бренды