GAS GAS SM 2008 Скачать руководство пользователя страница 26

Страница: 26 / 74

AIR CLEANER

A clogged air cleaner restricts the engine air intake, increasing fuel
consumption, reducing engine power, and causing spark plug fouling.

WARNING

A clogged air cleaner may allow dirt and dust to enter the carburetor
and stick the throttle open. This could cause an accident.

A clogged air cleaner may allow dirt and dust to enter the engine
causing excessive wear and tear and other damages.

Do not omit checking the element, before and after each race or
practice session. Clean it if necessary.

Element Cleaning

WARNING

Clean the element in a well-ventilated area, and make sure that
there are no sparks or flame anywhere near the working area (this
includes any appliance with a pilot light). Do not use gasoline to
clean the element because could cause an explosion.

To access the air filter, remove the seat by removing the bolt that
secures it.

- Place a lint-free towel in the intake port of the carburetor so no

dirt is allowed to enter the carburetor.

CAUTION

Do not turn the filter since it can be easily damaged or torn.

- Wipe out inside the air cleaner hoousing with a clean damp towel.

- Pull the cage (B) out

of the air cleaner (A).

- Squeeze it dry with a

clean towel. Do not
wring the element or
blow it dry since it can
be damaged.

- Clean the filter using

a soft bristle brush in
a bath of filter cleaning
fluid.

- Remove the cover.
- Remove the screw
(A) and remove the
filter (B).

(B)

(A)

Содержание SM 2008











































































Результаты поиска

Содержание SM 2008

Отзывы:

Похожие инструкции для SM 2008

Бренды по названию

Популярные бренды

GAS GAS SM 2008, Руководство пользователя

Результаты поиска

Содержание SM 2008

Отзывы:

Похожие инструкции для SM 2008

Бренды по названию

Популярные бренды