39
MAINTENANCE INSTRUCTIONS
When the chain is replaced, the engine output pinion and the rear
sprocket should also be replaced. If the teeth on these element are
worn then this will lead to a rapid wear of the new chain.
Check the engine output pinion and rear sprocket teeth and replace
them if they are worn.
* the chain must be removed by opening the connection link. The
length is measured from the two ends of the chain.
WARNING
Whenever the chain is removed, ensure that the clip on the chain
connection link is correctly installed with the closed part of the
"U" in the direction of rotation.
Note
Only use original replacement parts
.
BATTERY
Note
This battery is maintenance free and checking the fluid level is
not required. It is advisable to check the charge of the battery
periodically.
Battery - removing
To remove the battery, follow these steps:
A -
Clip
B -
Direction of
rotation of the chain
A
B
Chain guides - Checking
Check the chain guide
A
as well as the upper and lower parts of the
chain pad
B
. If there is any serious damage then replace these
elements.
A
