GAS GAS MC50 2021, Руководство пользователя

Страница: 104 / 119

20 TROUBLESHOOTING
102
Faults Possible cause Action
Engine stalls or is popping into the
carburetor Lack of fuel
–
Turn the knurled screw on the fuel tap all
the way counterclockwise.
–
Refuel. ( p. 23)
Engine takes in bad air
–
Check the intake flange and carburetor for
tightness.
The connector or ignition coil is
loose or oxidized
–
Clean the plug-in connection and treat it
with contact spray.
Engine overheats Too little coolant in cooling system
–
Check the cooling system for leakage.
–
Check the coolant level. ( p. 82)
Too little air stream
–
Switch off engine when standing.
Radiator fins very dirty
–
Clean radiator fins.
Foam formation in cooling system
–
Drain the coolant. ( p. 82)
–
Refill with coolant. ( p. 83)
Damaged cylinder head or cylin-
der head gasket
–
Check the cylinder head or cylinder head
gasket.
Bent radiator hose
–
Change the radiator hose.
White smoke emission (steam in
exhaust gas) Damaged cylinder head or cylin-
der head gasket
–
Check the cylinder head or cylinder head
gasket.
Gear oil exits at the vent hose Too much gear oil added
–
Check the gear oil level. ( p. 91)
Water in the gear oil Damaged radial shaft seal ring or
water pump
–
Check the radial shaft seal ring and the
water pump.