GAS GAS MC 85 2023, Руководство пользователя

Страница: 58 / 176

11 SERVICE WORK ON THE CHASSIS
56
V01312-10
Main work
–
Remove screws
1
.
–
Take off outer tube
2
.
–
Remove glass fiber yarn filling
3
from inner tube
4
.
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount the new glass fiber yarn filling on the inner tube.
Info
Mount the glass fiber yarn filling so that the thermal protec-
tion foil is positioned on the right in the direction of travel.
–
Slide outer tube over the inner tube with the new glass fiber yarn
filling.
Info
Seal the connecting cap
5
to the outer tube with silicone.
–
Mount and tighten the screws.
Guideline
Screw, main silencer M5 7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. ( p. 55)
11.30 Removing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
Preparatory work
–
Remove the seat. ( p. 52)
–
Turn tap handle of the fuel tap to the OFF position.