GAS GAS MC 85 2023, Руководство пользователя

Страница: 57 / 176

SERVICE WORK ON THE CHASSIS 11
55
Finishing work
–
Install the air filter box cover. ( p. 53)
11.27 Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
S04343-10
–
Remove screw
1
.
–
Pull off the main silencer from the manifold at exhaust sleeve
2
.
11.28 Installing the main silencer
S04343-11
–
Mount the main silencer with exhaust sleeve
1
.
–
Mount and tighten screw
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
11.29 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the rock wool dissipate and the silencer “burns out”.
Not only is the noise level higher, the performance characteristics change.
Preparatory work
–
Remove main silencer. ( p. 55)