GAS GAS MC 85 2023 Скачать руководство пользователя страница 70

Страница: 70 / 176

12 BRAKE SYSTEM

12.1

Checking the free travel of the hand brake lever

Warning

Danger of accidents

The brake system fails in the event of overheating.

If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit.

–

Set the free travel on the hand brake lever in accordance with the specification.

S04282-10

–

Push the hand brake lever forward and check free travel

Free travel of hand brake lever

≥

3 mm (

≥

0.12 in)

» If the free travel does not match the specification:

–

Adjust the free travel of the handbrake lever. (

p. 68)

12.2

Adjusting the free travel of the handbrake lever

S04283-10

–

Check the free travel of the hand brake lever. (

p. 68)

–

Adjust the free travel of the handbrake lever with adjustment
screw

Info

Turn the adjusting screw clockwise to reduce free travel. The

pressure point moves away from the handlebar.
Turn the adjusting screw counterclockwise to increase free

travel. The pressure point moves towards the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any

force.
Do not make any adjustments while riding.

12.3

Checking the brake discs

Warning

Danger of accidents

Worn-out brake discs reduce the braking effect.

–

Make sure that worn-out brake discs are replaced immediately. (Your authorized GASGAS Motorcycles work-

shop will be glad to help.)

400257-10

–

Check the front and rear brake disc thickness at multiple points for
the dimension

Info

Wear reduces the thickness of the brake disc around the

contact surface of the brake linings.

Brake discs - wear limit

front

3.5 mm (0.138 in)

rear

3.7 mm (0.146 in)

» If the brake disc thickness is less than the specified value:

Содержание MC 85 2023

















































































































































































Результаты поиска

Содержание MC 85 2023

Отзывы:

Похожие инструкции для MC 85 2023

Бренды по названию

Популярные бренды

GAS GAS MC 85 2023, Руководство пользователя

Результаты поиска

Содержание MC 85 2023

Отзывы:

Похожие инструкции для MC 85 2023

Бренды по названию

Популярные бренды