11 SERVICE WORK ON THE CHASSIS
52
11.13
Lubricating the steering head bearing
H02387-01
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in the
course of removal and installation of the lower triple clamp.
11.14
Removing the start number plate
A00778-10
–
Remove screw
1
.
–
Unhook the start number plate from the brake line and remove it.
11.15
Installing the start number plate
A00779-10
–
Position the brake line in holders
A
on the start number plate.
–
Position the start number plate. Mount and tighten screw
1
.
The holding lugs engage in the fender.
11.16
Removing front fender
Preparatory work
–
Remove the start number plate. (