17 SERVICE WORK ON THE ENGINE
116
H04991-10
Main work
–
Position an appropriate container under the engine.
–
Remove oil drain plug
1
with the magnet and seal ring.
Info
Do not remove screws
2
.
H04992-10
–
Remove screw plug
3
with oil screen
4
and the O-rings.
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
H04993-10
–
Position oil screen
4
with the O-rings on a pin wrench.
–
Position the pin wrench through the drill hole of the screw plug in
the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
H04994-10
–
Mount and tighten screw plug
3
with the O-ring.
Guideline
Screw plug, oil screen
M20x1.5
15 Nm (11.1 lbf ft)
–
Mount and tighten oil drain plug
1
with the magnet and a new
seal ring.
Guideline
Oil drain plug with
magnet
M12x1.5
20 Nm (14.8 lbf ft)
H04995-10
–
Remove screws
5
. Take off the oil filter cover with the O-ring.
