GAS GAS ES 700 2023 Скачать руководство пользователя страница 26

Страница: 26 / 139

6 CONTROLS

Warning

Danger of poisoning

Fuel is harmful to health.

–

Avoid skin, eye and clothing contact with fuel.

–

Immediately consult a doctor if you swallow fuel.

–

Do not inhale fuel vapors.

–

Rinse the affected area immediately with plenty of water in the event of contact with the skin.

–

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

–

Change your clothing if fuel spills on them.

–

Keep fuels correctly in a suitable canister, and out of the reach of children.

Note

Environmental hazard

Improper handling of fuel is a danger to the environment.

–

Do not allow fuel to enter the groundwater, the soil, or the sewage system.

V02709-10

–

Lift cover

of fuel tank filler cap and insert the ignition key.

–

Turn the ignition key 90° counterclockwise and take off the fuel tank

filler cap.

Info

The fuel tank filler cap has a fuel tank breather.

6.20

Closing the fuel tank filler cap

V02710-01

–

Put the fuel tank filler cap back on and turn the ignition key 90°

clockwise.

–

Remove the ignition key and close the cover.

6.21

Combination instrument

6.21.1

Overview

S02155-10

Overview of indicator lights (

p. 21)

Left button

Display

Right button

Содержание ES 700 2023












































































































































Результаты поиска

Содержание ES 700 2023

Отзывы:

GAS GAS ES 700 2023, Руководство пользователя, Страница: 26 / 139

Результаты поиска

Содержание ES 700 2023

Отзывы: