GAS GAS EC 125 - 2003 SERVICE, Руководство по обслуживанию

Страница: 55 / 58

EC FSE 2003 -
117
-
17
18
19
20
21
22
- Rear and/or engine sprocket worn.
- Chain lubrication insufficient.
- Rear wheel misaligned.
- Oil front fork insufficient or too thin.
- Spring weak or broken.
- Disc brake worn.
- Pad installed incorrectly or surface glazed.
- Cylinder damaged.
- Bracket, nut, bolt, etc. not properly
mounted or tightened.
- Tire, swing arm sleeve or needle bearin
damaged.
- Rim warped.
- Wheel misaligned.
- Front/ rear axle runout excessive.
- Frame bent.
- Steering maladjusted.
- Steering stem bent.
- Front fork bent.
- Wheel misalignment.
- Pad or disc worn.
- Brake fluid leak.
- Brake fluid deteriorated.
- Piston pump damaged.
- Brake maladjustment.
- El regulador de la tensión están
defectuosos.
- El fusible del relé de iluminación está
fundido.
TROUBLE CAUSE REMEDY
Abnormal train noise
Handlebar shakes or excessivery
vibrates
Motorcycle pull to one side
Brakes don't hold
Las lámparas se funden
El sistema de iluminación no
funciona
- Change it.
- Lubricate with apropiate chain oil.
- Align rear wheel.
- Add oil until correct level.
- Change spring.
- Change disc brake.
- Replace pad or change.
- Change cylinder damaged.
- Go to specialized garage.
- Change it for new pieces.
- Centre rim.
- Check wheel rim pressure. Adjust if it is necessary.
- Check rear/ front axle steering. Adjust if it's necessary.
- Go to specialized garage.
- Adjust steering. Go to specialized garage.
- Change steering stem and go to specialized garage.
- Change front fork.
- Align wheel.
- Change disc.
- Check and replace.
- Empty brake fluid and replace with new recomended one.
- Replace pump piston.
- Adjust brake.
- Dismount seat and fuel tank and chec connections, have
voltage regulator checked and fuse of box fuses.
- Dismount seat and fuse box cover and replace fuse.