GAS GAS 206 TXT PRO, Руководство пользователя

Страница: 28 / 56

7
-26-
To carry out any type of operations on and improve access to the carburettor, it is recommended
to remove the filter box. You must follow these steps:
1.- Loosen the admission port clamp.
2.- Unscrew 4 tapered Allen screws M6 which are used to anchor the filter box to the chassis.
3.- Pull the filter box straight up just enough until the rear intallation connecting fixture is visible.
4.- Disconnect the fixture (Fig. 1).
5.- Remove the filter box completely (Fig. 2).
C
Fig. 1 Fig. 2
The carburettor is now exposed and can be separated from the motor assembly by loosening the reed box
port clamp.
Loosen the two screws of the carburettor upper cover to allow the carburettor body being ready for cleaning
(Fig. 3).