GAS GAS 2005 FSE 450, Руководство по обслуживанию

Страница: 56 / 71

-
54
-
Setting the time
To set the time go to the clock / timer screen and hold in the mode
button until the time set screen appears, Reset can be used to
change the hours, the pressing Mode once more will allow the
minutes to be set also using the Reset button. Once the time is set
then the button mode will begin the clock at zero seconds of the
minute chosen, this can be useful to coordinate times (ex: in enduro
racing).
Chronometer
If we want to use the chronometer then press Reset to put it to zero.
Counting begins immediately.
The Trip distance in Km or Miles can be reset by pressing the
Reset button.
0.0
Trip distance
0000
Total distance
Trip distance in Km
To program the trip distance in Km or Miles. Once the battery is
connected the display indicates that the program is active (metric or
imperial). To make the change connect the battery while holding in
one of the buttons, the change will appear on the screen. This function
remains completely in memory even though the battery may not be
connected.
Clock precision
The clock precision can be adjusted if it is fast or slow.
Wheel design
The design of the wheel may change (21"). This affects the precision
of the speed and distance measurements.
Backlight
The backlight has an independent circuit powered by 8 to 18 volts
AC or DC. The circuit is protected.